nippon
2000D
are blind temperature controllers with deviation
meter and without deviation meter respectively.
They are most rudged, reliable, economical and
widely accepted solution for Plastic moulding,
Laminating, Heat sealing &
Pharmaceutical machines. They are useful in many
other temperature applications like ovens, furnaces,
dryers, chemical
plants, Foundry etc.....
Thermocouple and
Pt-100 Inputs
Several ranges
Automatic ambient
temperature Compensation.
Thermocouple break protection.
On/Off or proportional
control
Attractive dial for setting
Modular design
Working:
Temperature
required is to be set on high resolution attractive
dial. Instrumentation amplifiers linearises external
variable (t/c or Pt-100) & set point temperature.
Error amplifiers compare set and actual temperature
and gives command to relay driving circuit. Control
action of relay can be On-Off or Time proportionating
depending on heat inertia of the system.
On-Off Control
: In this type relay is on upto the set temperature
& cuts of at the set Point. System temperature
will come down & again relay will go on at
temperature 2°C below the set point. Same
function is repeated.
Time Proportionating
Control : In this type relay will be On &
Off is band of ±2°C of set point. On
& Off time will adjust as per the heat requirement
of the system. Of course total time cycle will
be of 15 seconds. We also offer band & cycle
time as per the application.
Specifications:
Inputs
Fe/K,Cr/Al,
Pt-Pt Rh & other thermocouples, Pt-100, Pt-50
RTD's....etc....
Range
0-100,0-400,0-600,
0-1200, 900-1600°C.... etc....
Setting
With
knob and attractive calibrated dial.
Set
Point Accuracy
±0.8%
of Span
Output
Relay
rated 230V/10A
Control
On-Off
or Time Proportional. On-Off control with 2°C
dead band. Time Proportional
control with ±2°C hysteresis & 15
second time cycle. Time Proportional Control
as per the application.
Deviation
Meter
Nippon
2000D is with -20°C to +20°C deviation indicator
showing deviation between set and process temperature.
L.E.D.
Indicators
Green
L.E.D. indicaters relay on.
Red L.E.D. indicaters relay off.
Box
Size
Modular
design in
96H x 96W x 100D DIN size box
72H x 72W x 100D DIN size box
48H x 48W x 100D DIN size box
DIN Rail Box
