Memory Bank has a non volatile RAM capable of data retention for 10 years.
The MEMORY BANK is connected to scanner, which sends the data to memory bank at every programmed interval. The memory bank keeps storing the data till its capacity is reached or till the user stops the data collection. Now the memory bank is disconnected from the scanner & connected to PC, where off-line version collects all the data from memory bank & stores in the format. Once the data is collected by the , the memory is erased & can be reused again. The instrument has unlimited write cycles. This arrangement is very useful for remote data monitoring or where PC can not be dedicated for application.
4000 Readings - 16 Channels
500 Readings - 16 channels,
|DATA COMMUNICATION||Interface : RS232, Baud Rate : 2400 bps, Data Bits : 8 bits, Parity Bit : None, Stop Bits : 1 bit.|
|COMMUNICATION PORT||9 Pin D-type Male Connector for Connection to SCANNER and PC.|
|DISPLAY||MiniNippo : LCD,
16 Characters • 2 Lines
HandyNippo: 64x128 Characters, Graphic LCD
|LED Indications : Power, Reset, Memory Full, Tx and Rx.|
|POWER SUPPLY||Rechargable Battery||90 - 260 VAC, 50Hz.|
|POWER CONSUMPTION||Less than 3VA||Less than 5VA@ 230 VAC|
Temp 55 C & Relative Humidity 99%
|BOX||Handy, 186mm(H) x 105mm(W)||72 mm (W) x 72 mm (H) x
110 mm (D)
|WEIGHT||150gms, easy to carry with Soft Leather Carry Case||250 grams|